Rugged Pneumatic Knifeholder
MT-A140
Introduce
MT-A140 Rugged type knife-holder is designed and optimized primarily for heavy thickness material slitting application. With its strong modular and thinness knife-holder that minimum slitting width only 19mm both satisfied narrow width and heavy slitting conditions. Exceptional rigidity capabilities make it can be accepted 8kg/cm2 air pressure and provide stable down force to perform heavy thickness slitting job. Same as other crush knife-holder family, it can meet guide-bar GB01/GB02/GB04 accessories and replace different types of blade for multipurpose application. The MT-A140 rugged knife-holder design make for high performance in a wide range of application as heavy rubber, paper, cloth, plastic film...etc..
Model MT-A140-BSK30
Min. slit width 19mm
Max. slit speed 100M/min(1)
Down-stroke 0~15mm
Air Pressure 3~6/kg/cm² ;
Blade O.D. Ø76.2mm
Guide-bar GB01/GB02/GB04
Feature Rigidity unibody knife-holder
; Stable downforce provided
Cost-effective
; Screw type fix method
Suitable Various Papers >>> kraft paper, silicone paper, releasing paper, decoration
wallpaper, masking paper, adhesive paper, thick paper
; board, corrugated carton paper, sandpaper.
Various Plastic films >>> flexible laminated films, soft & rigid PVC films, BOPP,
PET, PE, PS, LDPE, PLA, SBS, various adhesive tape.
; Cloth & fabrics >>>; non-woven cloth, synthetic leather, natural cotton, mesh
; cloth, medical cloth, label cloth...etc.
Foams >>> PSP foams,PE foams..etc
Drawing
(1) The maximum slitting speed is according to the actual materials, thickness and slitting results.
Recommend
Crush Cut Knives
Precision blade
Each blade will undergo special precision grinding and control of each blade's roundness to reach +/-0.005mm before the product leaves our factory. The precision blade with fine grinding hardness backing roller and through A310/A310H half-cut knife holder depth adjusting allows you to cut as depth as you want.
Guide-bar
GB05
GB05 is the new generation of the Guide-Bar series. It has the advantage of the linear guideway groove, side-fixed installation, lightweight, and fast delivery. Besides, there are two lengths of guide-bar to choose from, 2000mm and 2400mm.
Crush Cut Knives
130T Unibody Zigzag knife
The 130 teeth zigzag blade is made of tool steel (SKD-11) imported from Europe, processed by well heat treatment to increase its mechanical properties such as toughness and wear resistance. The blade tip is precisely ground to maintain an equal tooth pitch and peak, the slitting edge will generate the zigzag notch, to facilitate tearing along the notch. The zigzag blade is suitable for easy-tear applications such as medical tapes.
Bearing
5.0mm/6.2mm Bearing
Bearings for score blade, there are two different model , 697ZZ is for 5.0mm thickness and 17mm inner diameter score blade ; 6900RS is for 6.2mm thickness and 22mm inner diameter.
Copyright © 2018 Motoknife All rights reserved.
